Physical Port
- 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
- 2 100/1000BASE-X mini-GBIC/SFP slots
- 1 RJ45 console interface for switch basic management and setup
Power over Ethernet
-
- Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
- Up to 16 ports of IEEE 802.3af/802.3at devices powered
- Supports PoE Power up to 30.8 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100 meters in standard mode and 250m in extend mode
- PoE Management
– Total PoE power budget control
-
- – Per port PoE function enable/disable
-
- – PoE port power feeding priority
-
- – Per PoE port power limitation
-
- – PD classification detection
- Intelligent PoE features
– PoE usage threshold control
-
- – PD alive check
- – PoE schedule
Layer 2 Features
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Supports VLAN
– IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN IDs
-
- – Protocol VLAN
- Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
-
- – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
-
- – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN
-
- – BPDU Guard
- Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- – Cisco ether-channel (static trunk)
- Provides port mirror (many-to-1)
Quality of Service
- Ingress/Egress Rate Limit per port bandwidth control
- Storm Control support
- Traffic classification
- Strict priority and Weighted Round Robin (WRR) CoS policies
– Broadcast, Unknown Unicast, and Unknown Multicast
– IEEE 802.1p CoS- DSCP/IP Precedence of IPv4/IPv6 packets
Multicast
- Supports IGMP snooping v1, v2 and v3
- Supports MLD snooping v1 and v2
- Querier mode support
- IGMP snooping port filtering
- MLD snooping port filtering
- MVR (Multicast VLAN Registration)
Security
-
- Authentication
– IEEE 802.1X port-based network access authentication
-
- – Built-in RADIUS client to cooperate with the RADIUS servers
-
- – DHCP Option 82
-
- – RADIUS/TACACS+ login user access authentication
- Access Control List
– IPv4 IP-based ACL
-
- – IPv4 IP-based ACE
-
- – MAC-based ACL
-
- – MAC-based ACE
- MAC Security
– Static MAC
- – MAC Filtering
- Port Security for Source MAC address entries filtering
- DHCP Snooping to filter distrusted DHCP messages
Management
-
- Switch Management Interface
– Console/Telnet Command Line Interface
-
- – Web switch management
-
- – SNMP v1, v2c and v3
-
- – HTTPs secure access
- Built-in Trivial File Transfer Protocol (TFTP) client
- Static and DHCP for IP address assignment
- System Maintenance
– Firmware upload/download via HTTP/TFTP
-
- – Configuration upload/download through HTTP/TFTP
- – Hardware reset button for system reboot or reset to factory default
- SNTP Network Time Protocol
- Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
- SNMP trap for interface Link Up and Link Down notification
- Event message logging to remote Syslog server
- Four RMON groups (history, statistics, alarms and events)
- PLANET Smart Discovery Utility
*see specification tab for other details